4/2/1 Slots Battery Charger Smart Intelligent Charger Short-circuit Protection Universal Rechargeable Lithium Batteries Charger

Description

BT-C3100 V2.2 Charging Device 4 Working Modes 4-Slot Electric Charging Equipment Short-circuit Protection for Li-ion Ni-Cd Ni-MH
Feature:

1. Applicable Battery Type:

Lithium battery, model: 10440, 14500, 16340, 18500, 18650, 26650, 26500; NiMH battery, model: AA,AAA,C,D.
2. 4 Independent Charging Channels:

It has an independent charging control chip to precisely control the charging situation of each charging slot. Ideal for office and home use, the charger works with a 12V-3A power supply and uses a dedicated DC switching power supply. Optional There are four levels of charging current: 200 300 500 700 1000mA. If only 1 and 4 channels have batteries, the selectable current levels are: 200 300 500 700 1000 1500 2000mA; the discharge battery can be set to 200 300 500 700 1000mA .
3. 4 Working Modes:

charge, discharge, repair and capacity test and battery internal resistance test. In discharge mode, the battery will not be recharged, and the discharge capacity of the battery will be displayed. In charging mode, the charger is judged to be fully charged to 4.21V. LCD screen: It can display the real-time charging/discharging capacity, voltage, current, and time of 4-channel batteries. Working environment temperature: 0℃ – 40℃.
4. Function Buttons:

A.MODE selection button; B.DISPLAY display mode button; C.CURRENT current adjustment button; D.SLOT, which can adjust the working mode of each channel independently.
5. Specific Operation Method:

A. Press and hold MODE for 2 seconds to enter the working mode for selection, and then press this key to select four working modes, namely charge charging, discharge discharging, discharge referringh repairing , charge test capacity test and quick test battery internal resistance test. B. Press DISPLAY to display the size of the charging current, battery voltage, battery power, and battery charging and discharging time. C. When the charger is powered on The default charging mode and the charging current is 500mA. D. When the power is turned on, press CURRENT to adjust the current. When entering the work, to adjust the current again, you need to switch the working mode. Press this key to adjust the charging and discharging current. E. Press SLOT, the working mode of each channel can be adjusted individually. F. When the temperature of the battery is over 40 degrees or the temperature of the PCB board is over 40 degrees, the fan will start to rotate. G. The current four available for battery charging Gear: 200 300 500 700 1000mA, if only 1 and 4 channels have batteries, the current gears can be selected as: 200 300 500 700 1000 1500 2000mA. H. The discharge battery can be set to 200 300 500 700 1000mA. I. Select the charge test working mode, and the current size can be selected to be the same as the charge.

Specification:

Type: Electric

Display screen: Yes

Model Number: Chargers
Type: Charger
Model: BT-C3100 v2.2
Plug: EU plug, UK plug
Rechargeable battery type: Li-ion, NiMH, NiCd
Compatible: 1044014501634018650
Number of rechargeable batteries: 4
Input voltage: AC 100~240V 50/60Hz
Voltage output: DC 12V, 3.0A
LCD screen: Yes
Circuit Detection: Yes
Protection circuit: Yes
Short circuit protection: Yes
About voltage protection: Yes
About charging protection: Yes
Over discharge protection: Yes
Package size: About 160x140x35mm/6.3×5.51×1.37in
Weight: 470g

Note:

Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

1 x Chargers