Description
MIUI Food Waste Disposal
• Snap design is easy to install, splash-proof and silent.
• No blade grinding + deep double layer shredding, safe and more efficient.
• Pure copper motor with German imported technology, stronger power.
• Overload protection + high temperature protection, longer life.
• Daily use, a month of electricity consumption of about 2 degrees, ultra-low energy consumption.
Easy Disposal of Many Types of Food Waste
MIUI food waste disposer can handle 95 of food waste such as fruits and vegetables, fruit peels and shells, small bones, small ribs, seafood fish bones, small shells, etc.
Cannot handle: plastic bags, hair, large bones, large shells and non-food waste.
One Click – So Easy
Operation steps.
1. Turn on the water tap.
2. Start the processor with one button.
3. Pour the food waste into the grinding chamber.
4. x Please note: After waiting for the food to be completely ground, continue to keep the faucet on and keep it on for 5 seconds and then turn it off.
5. Turn off the machine when grinding is complete if you forget to turn off the processor, it will automatically turn off after 5 minutes
Blade Free Grinding System
The MIUI garbage disposer's grinding discs feature a bladeless grinding system with built-in 360° free-rotating knockout parts. Their shape determines that the grinding discs are covered with ample knocking points during the machine's telling rotation, which can directly break up food scraps instantly.
High Efficiency, Safety, Energy Saving
The machine is designed with three layers of grinding technology inside, the first layer is a stainless steel grinding disc that easily knocks up food residues. The second and third layers adopt gear structure, which is to deeply cut the residue debris of the first grinding disc, to guarantee that 100 of the residue flowing into the sewer becomes fluid substance and 100 avoid the problem of water pipe blockage.
The main machine adopts German permanent magnet motor, which provides powerful grinding power and can be loaded with 1000ml at a time. Users in the case of daily use of the machine, 1 month only consume about 2 degrees of electricity. Perfectly achieve low energy consumption, save time and energy, and more safety!
Current Overload Protection Design
Prevents overload of current, which may cause damage to the machine.
Thickened Feed Silicone Cover
Weaken the noise and prevent the residue from spattering when grinding.
Suitable Size
This machine is suitable for a sink opening of 110mm in size, while its button for the air switch is suitable for a 3cm mounting hole.
Important Tips
1. The product is suitable for 110mm sink opening.
2. The product comes with air switch as standard, and the recommended installation hole is 28.5~30mm.
Product Q & A
Q: How can I install the machine if the sink diameter is not 11cm?
A: The machine is suitable for sink diameter of 11cm, if the sink diameter is not suitable, we suggest you can use reducer reducer ring to change the sink diameter.
Q: How big is the hole of the air switch?
A: It is recommended that the diameter of the hole in the counter top or wall is 2.8~3cm.
Q: Is the machine easy to install?
A: It is very easy to install, installation requires some force. We simulate the installation steps in the product video, currently more than 99 of buyers can understand the installation steps through the video and instructions, if you find it very difficult, it is recommended to ask a professional for installation.
Q: Is the stone sink suitable for installing the machine?
A: It is recommended to judge by the thickness of the sink bottom, if the bottom thickness is 10mm 1cm or less, it is possible to install the machine. It is recommended to polish the stone sink mouth smooth before installing the machine.
Q: How can I check if the machine is working properly after I receive it?
A: Please install the air switch of the machine, then plug in the power and press the button, the machine can start or shut down normally.
Q: I received a new machine and found that there are scratches inside the grinding disc, how can I do?
A: The product is inspected at the factory, powered on and the machine is started. Therefore, the grinding disc left working traces, this is a normal situation, buyers can install and use the machine normally, please do not worry.
Q: What should I do if the machine is stuck?
A: A jammed state means that the machine has activated the electrical protection function. Please cut off the power and clean all the residues and foreign objects in the grinding chamber especially the edge gap, insert and turn the grinding disc with a screwdriver, and finally press the red reset switch lightly and power on to turn on normally.
Reviews
There are no reviews yet.